Klein Tools IR1KIT Manuel D'instructions page 3

To ensure safe operation and service of the tester, follow these
instructions. Failure to observe these warnings can result in severe
injury or death. Retain these instructions for future reference.
WARNING: LASER RADIATION. DO NOT STARE INTO BEAM.
Class II Laser.
• Exposing eyes to laser radiation can result in severe and permanent eye
injuries. NEVER look directly into the laser beam emitted by this instrument.
• DO NOT use the instrument if the case is damaged in any way.
• DO NOT modify the instrument in any way, as to do so could result in
emission of hazardous laser radiation than could result in severe and
permanent eye injuries.
• DO NOT use optical equipment such as lenses, prisms, optical scopes, etc.
to transmit, retransmit, or view the laser beam as this could result in severe
and permanent eye injuries.
• This product should not be used in any location that could result in
somebody looking at or having their eyes inadvertently irradiated by the
laser beam as this could result in severe and permanent eye injuries.
• This product should not be used by untrained operators or operators who
have not read and fully understood the instructions.
• Thermometer is NOT intended for use on people or animals.
• DO NOT remove warning labels from this instrument as this could result in
serious personal injury and increases the risk of exposure to hazardous laser
irradiation.
• Discontinue using the instrument immediately if it is acting abnormally.
• There are no user serviceable parts in this instrument.
• BURN HAZARD. Reflective materials may have a higher actual
temperature than the measured temperature.
This meter is designed for professionals who understand the hazards
associated with their trade. While this meter causes no foreseeable
dangers beyond its targeting laser, the objects being measured, as well as
the environment in which they reside, can be hazardous. Common safety
practices to follow when operating near temperature critical environments
are:
• Before using this meter, determine if an area is safe, verify correct operation
by measuring a known temperature value of a comparable object.
Pat. D791624
SAFE PRACTICES
Warning label on side of thermometer
1 x 9V
PP3 SIZE
LASER
2
EN 60825-1:2014+A11:2021, EN 50689:2021
WARNINGS
CAUTION
10 1
≤1mW @ 630-670nm
CONSUMER LASER PRODUCT
Complies with 21 CFR 1040.10 and 1040.11 except
for conformance with IEC 60825-1 Ed. 3., as
described in Laser Notice No. 56, dated May 8, 2019
3