Machine Specifications; Technical Data; Noise Emission; Dust Emission - Jet JTSS-1600 Mode D'emploi

4. Machine specifications

4.1 Technical data

Machine Table ................................................... 800x385 mm
Rear extension table ........................................... 310x500mm
Right extension table ......................................... 800x400mm
Sliding table size ................................................ 1600x270mm
Max. travel of sliding table....................................... 1600mm
Max. length of cut .................................................... 1350mm
Crosscut table ................................................... 680 x 580mm
Cross Cut Fence............................................. 1200 (2200)mm
Sawblade diameter ........................................ Ø 250 - 315 mm
Blade bore diameter ................................................. Ø 30 mm
Blade speed no ....................................................... 4700 rpm
Scoring blade diameter .............................................. Ø 90mm
Scoring blade bore diameter...................................... Ø 20mm
Scoring blade speed no ........................................... 8700 rpm
Cutting height at 90°/45° ................................... 100 / 80 mm
Tilting range of blade ................................................. 90°- 45°
Max Distance-blade to rip fence .............................. 1220mm
Dust port diameter .................................................... 100mm
Weight ......................................................................... 250 kg
Mains ....................................................... 400V ~3 /PE / 50Hz
Motor output power ........................................ P2=3.0 kW S1
Reference current .......................................................... 6.6 A
Extension cord (H07RN-F) ...................................... 4x1,5mm²
Installation fuse protection .............................................. 16A

4.2 Noise emission

Determined according to EN 1870-18
(Inspection tolerance 4 dB)
Workpiece plywood 16mm:
Acoustic power level (according to EN ISO 3746):
Idling ...........................................................LwA 98,3 dB (A)
Operating .................................................... LwA
Acoustic pressure level (according to EN ISO 11202):
Idling .......................................................... LpA
Operating ................................................... LpA
The specified values are emission levels and are not necessarily to
be seen as safe operating levels.
Although there is a correlation between emission and exposure
levels, this cannot be used reliably to determine whether or not
further precautions are required.
Factors that influence the actual level of exposure of the
workforce include the characteristics of the work room, other
sources of noise, the number of machines or other adjacent
processes.
The permissible exposure level can vary from country to country.
This information is intended to allow the user to make a better
estimation of the hazards and risks involved.

4.3 Dust emission

The circular saw has been dust emission inspected.
At an air velocity of 20m/sec on the dust port dia 100mm:
Vacuum pressure ...................................................... 800Pa
Volume flow ........................................................ 565 m³/h
The TRK-value of 2 mg/m
4.4 Content of delivery
Main saw unit
Cast iron extension table
Steel plate extension table w/support leg
Rear extension table w/support
Swing arm assembly (inside main saw unit)
Cross cut table
Roller, cross cut
Blade guard
50mm dust hose
Dust port
Mitre gauge
Hand wheels (2)
Hardware & Tools:
-13-15 mm open head wrench
- Arbor wrench
- Arbor pin
- 3, 4, 5, 6 mm "L" wrench
- Push stick
- Edge shoe
(Some parts are inside the main saw unit)
104 dB (A)
Rip fence
84,4 dB (A)
90,2 dB (A)
Rip fence rail
Rear support rail
Sliding table
Sliding table carrier
Support legs for sliding table (2)
Cross cut fence
Hold down w/fence
Flip stop
3 is not exceeded.
Main crate
Rail crate