Nolan N21 VISOR Sécurité Et Instructions D'utilisation page 9

- Delicately hand-wash in lukewarm water (max. 30° C) and neutral soap.
- Rinse with cold water and allow drying at room temperature, away from direct sunlight.
- Never machine-wash the inner comfort padding.
- The inner polystyrene is an easily deformable material. It is apt to change or get partially destroyed to help absorb
shocks.
- Do not modify or alter the helmet's internal polystyrene components in any way.
- Clean the inner components with a damp cloth only and allow it to dry at room temperature away from direct sun-
light.
- Never use tools or equipment of any sort to carry out the steps described above.
HELMET LOCK RING
Some versions of this helmet feature a metallic ring called HELMET LOCK RING (Fig. 17), that can be used for hanging
the helmet to the special hook placed on many motorbikes.
WARNING
- Only use the HELMET LOCK RING to hang the helmet to the motorbike.
- Check that - when hung to the hook- the helmet is not directly exposed to heat sources or other stresses that may
modify its characteristics or damage it.
- the HELMET LOCK RING is not related to the helmet retention system (strap) and/or its adjustment (see specific
instructions).
- Never use the HELMET LOCK RING to fasten the helmet to the head and/or to adjust the tension (see instructions
above).
- Do not remove the HELMET LOCK RING form the retention system strap.
- In case of malfunctioning or damages, please contact an authorised Nolan dealer.
- Delicately hand-wash in lukewarm water (max. 30° C) and neutral soap.
- Rinse with cold water and allow drying at room temperature, away from direct sunlight.
- Never machine-wash the inner comfort padding.
- The inner polystyrene is an easily deformable material. It is apt to change or get partially destroyed to help absorb
shocks.
- Do not modify or alter the helmet's internal polystyrene components in any way.
- Clean the inner components with a damp cloth only and allow it to dry at room temperature away from direct sun-
light.
- Never use tools or equipment of any sort to carry out the steps described above.
HELMET LOCK RING
Some versions of this helmet feature a metallic ring called HELMET LOCK RING (Fig. 17), that can be used for hanging
the helmet to the special hook placed on many motorbikes.
WARNING
- Only use the HELMET LOCK RING to hang the helmet to the motorbike.
- Check that - when hung to the hook- the helmet is not directly exposed to heat sources or other stresses that may
modify its characteristics or damage it.
- the HELMET LOCK RING is not related to the helmet retention system (strap) and/or its adjustment (see specific
instructions).
- Never use the HELMET LOCK RING to fasten the helmet to the head and/or to adjust the tension (see instructions
above).
- Do not remove the HELMET LOCK RING form the retention system strap.
- In case of malfunctioning or damages, please contact an authorised Nolan dealer.
9
9