Preparing The Mower For Transport; Ordering Spare Parts; Disposal And Recycling - EINHELL Expert GE-TM 102 B&S Mode D'emploi D'origine

7.4 Preparing the mower for transport

1. Drain the petrol tank using a petrol extraction
pump.
2. Always let the engine run until it has used up
the remainder of petrol in the tank.
3. Empty the engine oil from the warm engine.
4. Remove the spark plug boot from the spark
plug.
5. Clean the housing and mower unit.

7.5 Ordering spare parts

Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_GE_TM_102_BS_SPK7.indb 30 Anl_GE_TM_102_BS_SPK7.indb 30
GB
- 30 -
02.08.12 10:21 02.08.12 10:21