Watts BT-M6Z02-RF 230V Guide Utilisateur page 6

5 HOW TO INSTALL CORRECTLY YOUR RF SYSTEM
Please respect the mounting to optimize sensibility and avoid any dysfunctionment
Antenna must placed:
- outside the metallic box
- in vertical position
- and at least at 50cm of metallic parts
If you have several antenna (several BT-M6Z02RF / BT-HCM02-RF in the same place), they must be placed at
minimum 80cm of each other.
6 SYSTEM POSSIBILITIES:
Please refer to System configuration manual (www.wattselectronics.com), for more information on the different
possibilities.
We distinguish 2 types of installation, if you have a BT-CT02-RF in your installation jump to 6.B
6.A. Installation without Touchscreen BT-CT02-RF
In this installation, we have 2 subcases:
1- Installation "Standalone": Typical installations:
a. Only one BT-M6Z02-RF
b. Several BT-M6Z02-RF with local pump management
2- Installation "Centralyzed management": In this case, there are several BT-M6Z02-RF that needs to
communicate together to drive correctly pump handle Heat/Cool signal.
a. Several BT-M6Z02-RF with global pump management
b. At least several BT-M6Z02-RF and one BT-HCM02-RF
6.A.1 Standalone InstallationExemple of a "Standalone Installation"

Good
The active antenna must be mounted vertically.
Metallic Box
BT-D02 RF
BT-WR02 RF
( OPTIONAL )
50 cm
BT-A02 RF
BT-S6Z02 RF
BT-M6Z02 RF
( OPTIONAL )
BT-HCM 02 RF
( OPTIONAL )
BT-D02 RF
BT-WR02 RF
( OPTIONAL )
RF Links to do