Transmitters - Girsberger ATC Manuel D'utilisation

7. System Setup
7.2 Transmitter
1. Insert 4 Alkaline Batteries 1,5 V Type IEC LR20 (size D).
Note: Only use new batteries that come in the original package. All of them must be of the
same brand, same type, same production lot and end of use date. Watch for proper
polarity and for clean contacts.
2. Turn the transmitter on by pressing the ON / OFF key. The green LED will blink three times
3. Close the transmitter, tighten all four screws securely.
4. The transmitter is now ready for use.
ON / OFF
43