Activating / Deactivating A Transmitter; Probe Hits - Girsberger ATC Manuel D'utilisation

5. Expert Mode

5.3 Activating / Deactivating a Transmitter

Vict : 1 On: yes

5.4 Probe Hits

1*
Vict : 1 On: yes
38
You can scroll through the list of available transmitters by means of the
+ VICTIMS / – VICTIMS keys.
The selected transmitter will be indicated on the upper line of the display.
On the lower line, the status of the transmitter will be indicated
(activated / deactivated).
The + TIME key activates the selected transmitter, the – TIME key
deactivates it.
The transmitters will automatically indicate a probe hit. Three consecutive
probe hits, one second apart each, on the probing surface will cause an
optical and acoustic indication at the control unit.
On the upper line of the display, an asterisk will show up after the number
of a transmitter that has been hit.