Automatic Search; Exercise Counters - Girsberger ATC Manuel D'utilisation

6. System Check

6.3 Automatic Search

Se a r ch i ng - > 5
1 2 3 4 5
Search complete
1 2 3 4 5 6 7 8
6.4 Exercise Counter
N: 5 1 2 E : 137
x x x x x x
- -
Press both the – VICTIMS and + VICTIMS simultaneously for at least
5 seconds. The system will start a search for all transmitters within range.
All transmitters that have been found will be indicated. Only those can be
used for standard and expert mode exercises.
Pressing the + TIME key during the automatic search (see section 6.3) will
trigger the display of the exercise counters after the search.
On the upper line of the display, N marks the standard exercise counter and
E marks the expert mode exercise counter. On the lower line, a x stands
for a found transmitter, and a _ stands for a transmitter that has not been
found. Pressing the START / STOP key returns the system to standard
mode.
41