Dimensions, Weights; Connection To The Evaluation Unit - Balluff BTL7-P511-M J-DEXC-TA12 Série Notice D'utilisation

BTL7-P511-M _ _ _ _ -J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
7
Technical data (continued)
7.5

Dimensions, weights

Rod diameter
Nominal length
Weight (depends on
length)
Housing material
Flange material
Rod material
Rod wall thickness
Housing mounting
7.6

Connection to the evaluation unit

The maximum sampling rate f
value is available with each sampling, can be found in the
following graphic:
f in Hz
A,max
Fig. 7-1: Maximum sampling rate depending on the nominal length
20 english
10.2 mm
25...7620 mm
Approx. 3 kg/m
Stainless steel
Stainless steel
Stainless steel
2 mm
Flange with 6 holes
, at which a new current
A,max
Nominal length in mm
Ignition protection "d"
Flameproof enclosure
The minimum sampling rate f
A,min
is 62.5 Hz.
(1) 1 magnet
(2) 2...16 magnets