Required Dispenser; Automatic Threshold; Max Introduction; Residual Credit - Comestero Group SimplyCoin Mode D'emploi

_________________________________________________________________________________
will make a change at the same level – example:
10.00 € = 10 1€ pieces
When a 10€ banknote is introduced, if we want a
corresponding dispensing of 12 1€ tokens, i.e. we
want to provide a BONUS, the set value will be
10.00 while the dispensed value will be 12.00.
Example: The change machine is programmed
in such a way as to satisfy the change with 1€
coins only.
Note:
If we set the change in order to satisfy the
smallest banknote or coin, the changes of the
other banknotes or coins will not have to be set
as these will be considered as multiples of the
first.

6.4.3 Required dispenser

REQUIRED DISPENSER
PROGRAMMING
The indispensability of one dispenser rather than
the other can be set. In this way in case of empty
or failure of that particular dispenser, the entire
change machine will stop. This function is not
applicable to Changeuro Easy and SimplyCoin as
these machines require only one Hopper.
REQUIRED DISPENSER
NOT PROVIDED
Message displayed if you decide not to use the
above mentioned function.
REQUIRED DISPENSER
HOPPER 1
Message displayed if you choose hopper
indispensable dispenser.
REQUIRED DISPENSER
HOPPER 2
Message displayed if you choose hopper 2 as
indispensable dispenser.

6.4.4 Automatic threshold

AUTOMATIC THRESHOLD
PROGRAMMING
In this function an amount can be set, after
reaching this amount the machine will dispense
automatically.
For example, if the automatic threshold value is
set at 10€, up to 9.90€ the machine will give the
possibility to manually make the dispensing
selection between the set tables and to obtain the
change it will be necessary to press the
dispensing button. After introducing a 0.10 €
coin and thus reaching the threshold, the machine
will dispense automatically.

6.4.5 Max introduction

MAX INTRODUCTION
PROGRAMMING
In this function it is possible to set the value of
the max. introduction limit, beyond which the
machine can accept only one banknote or coin.
After exceeding the value of the Maximum
Limit, the systems of payment will be inhibited
and only the change operations will be possible.
33
_________________________________________________________________________________
as It is not possible to set a value lower than the
value of the highest banknote or lower than the
value of the highest change level. If this is
unduly carried out, the set amount will be
ignored and the assumed limit will be the limit of
the highest banknote or table value.

6.4.6 Residual credit

RESIDUAL CREDIT
PROGRAMMING
The residual credit function allows to select three
different ways of managing the residual credit,
which is the fraction of the smallest dispensable
entity.
RESIDUAL CREDIT
YES (NOT TIME)
RESIDUAL CREDIT
RESIDUAL CREDIT
By selecting "YES (NOT TIME)" the machine
will keep in memory the residual credit, if any,
physically not dispensable and it will consider
this credit in the following changes.
By selecting "DISABLED" at the end of the
change operation, the residual credit, if any,
would be cleared.
By selecting "TIME x
can be fixed, after which the change is
automatically cleared.

6.4.7 Historic clearing

HISTORIG CLEARING
PROGRAMMING
In this function the historical accounting of the
machine can be cleared.

6.5 Configuration menu

The Configuration menu includes the Hardware
settings of the machine. These functions are
directly set by Comestero's skilled technicians
during the manufacturing phase. Therefore prior
to any variation in this menu, contact the After-
sale Manager who will help you during the
operations.
The functions that can be programmed in this
menu are explained below
The Configuration menu is a scrolling menu, to
move from one function to another, press "+"
and "-", press "OK" to confirm.
CONFIGURATION:
DISABLED

6.5.1 Language selection

TIME x Minutes
LANGUAGE SELECTION
CONFIGURATION
The change machine is designed to work with
different languages according to the country of
use.

6.5.2 Value table

MINUTES" , a time
VALUE TABLE
CONFIGURATION
In the Value Table function, different parameters
can be set; the functions that can be programmed
in this menu are explained below.
– Currency:
In this function it is possible to select the symbol
of the currency of the country where the machine
will be used.
34
CONFIGURATION TECHNICIAN
MANAGEMENT
LANGUAGE SELECT.
VALUE TABLE
CURRENT DISPENSER
EXIT
CURRENCY
CONFIGURATION