_________________________________________________________________________________
As regards SimplyCoin change machine, the
order codes are as follows:
As regards SimplyCoin change machine, the
order codes are as follows:
CM/SIMPLYCOIN-S
Complete version
NV5 parallel reader
RM5FB0 Coin box
CM/SIMPLYCOIN-GE
Version with RM5FB0
Coin box only.
CM/SIMPLYCOINV5
Version with NV5 parallel reader
only.
4
GENERAL TECHNICAL
DESCRIPTION
4.1 "Changeuro DualCoin"
technical features
Dimensions:
–
400mm x 616mm x 350mm counter/wall
version
−
400mm x 1430mm x 350mm version
including base
Weight: 34 kg
Coin/token dispenser: Universal
Hopper
MKIV Coin Controls
Diam: 20÷30 or 6÷20
(mm.)
Tickness: 1,5÷3,5mm
MKII SUZO
Banknote reader:
Smiley NV5 parallel
RM5FB0 (binary)
Electronic coin box:
Power supply:
230 VAC - 50 Hz
Input:
60 VA max
Operating
0° ÷ +50° C - Non
temperature:
condensed
humidity
from 10% to 90% .
4.2 "Changeuro Easy"
technical features
Dimensions:
–
260mm x 440mm x 335mm counter/wall
version
−
260mm x 1400mm x 335mm version
including base
Weight: 20 kg
Coin/token dispenser: Universal
Hopper
MKIV Coin Controls
Dia: 20 ÷ 30 mm.
(or 16 ÷ 20 mm.)
Tickness: 1,5 ÷ 3,5 mm
MKII SUZO
Banknote reader:
Smiley NV5 parallel
RM5FB0 (binary)
Electronic coin box:
Power supply:
230 VAC - 50 Hz
Input:
60 VA max
0° ÷ +50° C - Non
Operating
temperature:
condensed
humidity
from 10% to 90% .
4.3 "Changeuro Easy without
Display" technical
features
Dimensions:
−
260mm x 440mm x 335mm - counter/wall
version.
−
260mm x 1400mm x 335mm version
including base.
Weight: 20 kg
Coin/token dispenser: MKII SUZO
Banknote reader:
Smiley NV5 parallel
Electronic coin box:
RM5FB0 (binary)
Power supply:
230 VAC - 50 Hz
Input:
60 VA max
Operating
-10° ÷ +50° C
Non
temperature:
condensed
humidity
from 10% to 90%.
29
_________________________________________________________________________________
4.4 " SimplyCoin" technical
features
Dimensions:
–
350mm x 490mm x 375mm overall
dimensions
−
80mm x 900 overall dimensions
Weight: 25kg
Coin/token dispenser: Universal
Hopper
MKIV Coin Controls
Diam: 20 ÷ 30 mm.
(or 16÷20 mm.)
Tickness: 1,5 ÷3,5 mm.
MKII SUZO
Banknote reader:
Smiley NV5 parallel
RM5FB0 (binary)
Electronic coin box:
Power supply:
230 VAC - 50 Hz
Input:
100 VA max – 25 VA
in stand-by
0° ÷ +50° C Umidità
Operating
temperature:
dal 10% al 90% non
condensata.
Note: model, design, features may be subject to
changes without notice.
4.5 Dispenser position
(Hopper)
4.6 Programmer
The change machine can be programmed only by
means of the relevant external programmer
included in the supply.
5
SYSTEM ASSEMBLY
5.1 Device fixing
The cabinet ensures a wall, counter, or base
fixing thanks to three holes in the support side
and two slots and one hole in the rear side..
Note: power supply 230 VAC - 50 Hz
5.2 Installation
To start the machine introduce coins/tokens into
the dispensers until these are full (to exit from
EMPTY condition). In this way the different
systems of payment are enabled and the machine
is ready to work.
30