Télécharger Imprimer la page

Unit Description; Initial Use - Beurer TL 80 Mode D'emploi

Masquer les pouces Voir aussi pour TL 80:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
• Disconnection from the mains supply is only guaranteed if the mains plug has been removed from
the socket.
• To guard against the risk of electric shock, this device may only be connected to a power supply
network equipped with a protective conductor.
• Keep the mains cable away from hot objects and naked flames.
• Do not make any changes to the device without the manufacturer's permission.
• If the device has been changed, thorough tests and checks must be carried out to ensure the
continued safety of further use of the device.
• As the patient/user, you can operate all functions of this device.
General notes
Important
• If you are taking medication such as pain relievers, antihypertensives or antidepressants, consult
your doctor before using the daylight therapy lamp.
• People with retinal diseases as well as diabetics need to be examined by an ophthalmologist before
beginning to use the daylight therapy lamp.
• Please do not use if you have an eye disease such as cataracts, glaucoma, diseases of the optic
nerve in general and inflammation of the vitreous humour.
• If you have health concerns of any kind, contact your general practitioner!
• Before you use the unit for the first time, remove all packaging materials.
• The lamp tubes are excluded from the warranty.
Repairs
Important
• Do not open the device. Please do not attempt to repair the unit yourself. This could result in seri-
ous injuries. Failure to observe this regulation shall void the warranty.
• If you need to have the unit repaired, contact customer service or an authorised dealer.

4. Unit description

Overview
9.
8.

5. Initial use

Setup
Take the device out of the plastic wrapping. Check the device for damage or faults. If you notice any
damage or faults on the device, do not use it and contact customer services or your supplier. Place the
1.
1. Cover
2. Fluorescent screen
2.
3. Tubes (2 x 36 Watt)
4. Rear of the device housing
5. Rear of the socket housing
3.
6. Front of the socket housing
7. Stand
4.
8. Mains cable with plug
9. On/Off button
5.
6.
7.
10

Publicité

loading