Exchange Of Saw Blade - Scheppach kw 7.0 Traduction Des Instructions D'origine

• Check all safety installations after each maintenance and cleaning activities.
• Ensure that there are no tools or other materials on or in the machine before putting it into operation.
• Remove possible sawdust blockages at the discharge.
Service information
Please note that the following parts of this product are subject to normal or natural wear and that the following parts
are therefore also required for use as consumables.
Wear parts*: sawblade; seesaw inserts
* Not necessarily included in the scope of delivery!

17. Exchange of saw blade

Fig.1
Fig.2
Fig.3
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Ziehen Sie den Netzstecker oder bei Gelenkwellenbetrieb
den Zündschlüssel ab!
Wait until stationary and allow to cool down!
The exchange of the saw blade can only be undertaken in fire-
wood cut position.
Undo the protective hood on the left and right with 2 hexagon
screws respectively, until the screws turn freely unhindered.
Now fold open the protective hood.
(Fig. 1; 2; 3)
GB 33