Helite Hip'Safe Manuel D'utilisation page 26

26
BATTERY
Hip'Safe has 1 week autonomy. The system is 100% automatic and consumes little energy : it
switches off automatically when the belt is removed or when no moves are detected. You can
recharge your belt like any electronical device with any USB cable.
Never close the buckle
when the belt is charging.
Low battery:
If a continous and quick
«beep» and a red LED appear when you
close the belt that means the battery is low.
Battery left: 1 day
PROTECTION COVER
A protection cover is included with Hip'Safe. Other covers with different colors and sizes are
available at our online shop: www.helite.com or via our dealers.
The cover can be washed and removed easily: following the pressure buttons to take it off.
User Guide
The belt is unloaded: Plug
the charger into the buckle.
Full battery: When the belt is fully
charged, the LED turns green.
The charging time is about 3 hours.
The belt is charged and ready
for use again.
Never use the belt without the
cover. Always check that the
cover is in the right position:
- The arrow symbols "UP" and the
figure must point upwards.
- The "UP" symbols in red and
yellow inside the cover must
match.