Technical Description - Helite Hip'Safe Manuel D'utilisation

24
y Technical description
THE CONCEPT
Hip'Safe is a wearable airbag that protects the hips in case of fall. When a fall is detected both
airbags deploy automatically (in 0,08 seconds) above the hips to ensure an optimal protection
before ground impact.
Daily use
ALGORITHM AND ELECTRONIC SYSTEM
The belt includes an electronic system (situated inside the belt behind the CO2 cartridge and
not accessible for the user). It uses a complex algorithm and powerful sensors which analyze
more than 1000 times per second people's motion in context and can determine if the person
is walking or falling down. The fall is detected in 200 ms, the airbags inflate in 80ms. The
person is fully protected in 280 ms.
AIRBAG PROTECTION
The airbags are made and tested in our workshop in Dijon. They are made of ultra strong
nylon which absorbs and resists the shock. When the air cushions are totaly inflated, the
maximum pressure is about 200 mbar. Then the pressure decreases progressively thanks to
a decompression leak.
Femoral
neck
User Guide
Protected area:
When the airbag is inflated, it protects
Protected
a large area. It protects all the hip area
area
from the top of the hips to the middle
of the thighs.
After a fall