Preventing Material Damage - Bosch Benchmark B30Bb130Ss Instructions D'installation

Preventing material damage

NOTICE:
The high weight of the appliance or, if not rolled in a straight line, the appliance's castors
may damage the floor when the appliance is moved.
Transport the appliance using a hand-cart.
▶
Use floor protection when moving the appliance, and do not move it in a zigzag fashion.
▶
Using the base, runners or appliance doors as a seat or climbing surface may damage the
appliance.
Do not stand or lean on the base, runners or doors.
▶
If the water pressure is too high or too low, this may impair functioning of the appliance.
Make sure that the water pressure in the water supply system is at least 29 psi (200 kPa)
▶
and max. 116 psi (800 kPa).
If the water pressure exceeds the maximum value specified, a pressure-reducing valve
▶
must be installed between the drinking water connection and the hose set of the appli-
ance.
Modified or damaged water hoses may result in material damage and damage to the appli-
ance.
Never kink, crush, modify or cut through water hoses.
▶
Never re-use water hoses that have been used before.
▶
Never pull on the water hose on the rear panel of the appliance.
▶
5