Num'axes PROTECTION PIE1061 Guide D'utilisation page 32

Masquer les pouces Voir aussi pour PROTECTION PIE1061:
Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
10.4. View photos/videos on the camera LCD screen
‒ Slide the switch to the SETUP position (the LCD screen will light up), then press
on the REPLAY button.
‒ Press the  and  buttons to go from photo/video to photo/video.
‒ Press the REPLAY button to exit.
10.5. Delete photos/videos on the camera
‒ Slide the switch to the SETUP position (the LCD screen will light up), then press
on the REPLAY button.
‒ Press the  and  buttons to go from photo/video to photo/video.
‒ Press the MENU button then select "Delete" and press OK.
‒ Select "One" (delete the selected photo/video) or "All" (delete all photos/videos)
then press OK.
‒ Press the REPLAY button to exit.
10.6. Transfer photos/videos to a computer
To upload photos/videos on a computer, connect the supplied USB cable to the
camera's USB port and then directly to a main USB port on your computer. The
camera turns on automatically regardless of the selected mode (OFF | SETUP | ON).
The computer will recognize the device as "removable storage".
In the removable storage, you will find "DCIM" then "DCIM/PHOTO" (photo files) and
"DCIM/MOVIE" (video files). You will be able to copy the files to your computer.
MAC computers show an "Unknown" drive on the desktop. When clicking on this
drive, the program iPhoto is automatically started.
WARNING: Do not disconnect the USB cable or remove the memory card while
copying photos/videos. You could lose files.
11.
Setting up the camera
− Mount the camera facing north or south, not east or west as the rising and setting
of the sun could produce false triggers and overexposed images.
− If you're covering a trail, face the camera down or up the trail.
− Clear out any brush or weeds in front of the camera. These can cause false
triggers due to temperature and motions disturbances in front of the camera
(especially in windy days).
− Check the power level of the batteries before setting up the device.
− Make sure the memory card is properly inserted and have sufficient available
space.
− Verify time and date are correct.
Guide PIE1061 – Août 2025 – ind. E - 32/140
Table des Matières
loading

Table des Matières