Num'axes PROTECTION PIE1061 Guide D'utilisation page 31

Temperature
Password
Beep Sound
Camera
Auto Power Off
LCD screen
standby
Language
Format memory
card
Test memory
card
Default Settings
System
Fahrenheit | Celsius
OFF | ON
Select "ON" then press OK to enable password protection for
your camera (4 characters).
OFF | ON
You can choose to hear a beep sound or not when you press
a button on the device.
OFF | 3 minutes | 5 minutes | 10 minutes
In SETUP mode, the camera will automatically power off
after 3, 5 or 10 minutes without any press on the keypad.
Slide the switch to the OFF position then back to the SETUP
position if you want to continue the settings.
If you select "OFF", there is no automatic shutdown of the
camera in SETUP mode.
OFF | 1 minute | 3 minutes | 5 minutes
In SETUP mode, the LCD screen will automatically go to sleep
after 1, 3 or 5 minutes of no activity.
Press any key to wake up the screen.
If you select "OFF", the screen does not go to sleep in SETUP
mode.
English | Deutsch | Español | Nederlands | Français |
Polski | Dansk | Italiano | Magyar | Slovenščina
No | Yes
Select "Yes" then press OK to format the memory card.
No | Yes
Select "Yes" then press OK to test the speed of your memory
card.
Passed test = sufficient memory card speed
Test failed = you need a memory card with higher speed
No | Yes
Select "Yes" then press OK to reset the camera back to the
factory default settings.
‒ FW Update: No | Yes
Allows you to update the firmware loaded in the device.
‒ FW Version: This parameter is used to find out the version
of the software loaded in the device (MCU | HTC).
Guide PIE1061 – Août 2025 – ind. E - 31/140