Num'axes PROTECTION PIE1061 Guide D'utilisation page 25

6. Attaching the cellular antenna
Screw the antenna onto the socket on top of the camera. Make sure it is securely
attached, but do not over-tighten it.
7. Mobile app
The trail camera works with a free mobile app available for Android and iOS.
App name: Camera Trap Wireless
The mobile application will allow you to carry out all the settings of the device and
view the photos sent by the camera.
In Google Play (Android) or in the App Store (iOS), search for the Camera Trap
Wireless app and install it on your smartphone. Open the application and create a
user account by following the instructions displayed on the screen.
8. Adding the camera to the app
‒ Slide the camera switch to the SETUP position then press the MENU button.
‒ Press the  button to go to the
‒ Use the  button to scroll down to the QR Code parameter then press OK. A
QR code appears on the screen.
‒ Open the Camera Trap Wireless application on your smartphone and log in to
your user account.
‒ On the home page, press the  icon at the top right of the screen. A QR code
reader will appear on your smartphone.
‒ Scan the QR code on the camera screen to configure it with the app.
9. Camera synchronization with the Camera Trap Wireless app
Once the camera has been added to
your account,
synchronize it with the application.
The camera is waiting to come online.
It appears with no signal and no battery,
with a red flag (on Android).
Alternatively, on iOS, a yellow message
says, "The camera is not on board yet."
Set the camera switch to SETUP, then
press the SYNC button.
you need to
Guide PIE1061 – Août 2025 – ind. E - 25/140
menu (NETWORK menu).