Control Of The Robot Mower Using The App; Technical Data; Noise - Powerplus Powdpgrms1 Mode D'emploi

8.5

Control of the robot mower using the app

To control the robot mower by using the app, first download the Powerplus app for robot
mowers to your smart phone. The Powerplus app is available via below QR code (Fig. 11).
Please refer to the operation manual of the APP for the specific operations.

9 TECHNICAL DATA

Type
Battery technology
Battery voltage
Electric motor type
Cutting width
Max slope
Boundary wire (max.)
Charging current
IP rating
Cutting height

10 NOISE

The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can differ from the
declared total value depending on the ways in which the tool is used.
The safety measures to protect the operator are identified based on an
estimation of exposure in the actual conditions of use.
A-weighted emission sound pressure level at the operator position as determined according to
the relevant standard, where this level does not exceed 70 dB(A):
Acoustic pressure level LpA
Acoustic power level LwA
If there is any abnormal vibration please inspect your mower for any abnormal blockage. If
necessary clean the mower and/or replace the blades.
Copyright © 2024 VARO
POWDPG6010
POWDPG6010
Li-Ion
20V
Brushless
180mm
36%
160m -
3.0A
IPX5
30-60mm
48 dB(A)
59 dB(A)
P a g e | 15
EN
www.varo.com