General; Warranty; Safety Information - Becker Centronic SensorControl SC431 Notice D'utilisation

Operating Instructions
The easytoinstall SC431 operates your shutter/sun protection system on the
basis of the preset sun and twilight threshold values. The device also comes
with a broken glass sensor.
The SC431can be operated manually at any time.
BeckerAntriebe GmbH will be released from all warranty and product liability
obligations if the customer modifi es the equipment without prior approval from
BeckerAntriebe GmbH or if the equipment is installed incorrectly and/or con-
trary to the specifi ed installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and offi cial regu-
lations governing manufacture and advice to customers, especially the EMC
regulations.
This product is subject to technical developments and improvements. Please
refer to the current sales brochure for the precise product specifi cations.
Caution
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodifi ed Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical
type (CR 2032) only.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
• The equipment contains small parts that could be swallowed.
14

General

Warranty

Safety Information