General; Warranty - Becker Centronic SensorControl SC561 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
The SC561 can be used to control one or more sun protection systems. The
threshold value for sun protection control can be set with the following transmit-
ters: Centronic SunWindControl SWC441, SWC411 and SWC545.
This device is excellent because it is so easy to operate.
Note
The SC561 is equiped with a solar cell for power supply
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
10

General

Warranty