General; Warranty - Becker Centronic SensorControl SC861 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
The SC861 can be used to control one or more sun protection systems. The
threshold values for sun protection and wind monitoring can be set via all
Centronic handheld and wall-mounted transmitters with a settable sun and wind
threshold.
This device is excellent because it is so easy to operate.
Note
The SC861 is equiped with a solar cell for power supply
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e. g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
10

General

Warranty