General; Warranty - Becker Centronic SensorControl SC861 Notice D'utilisation

Operating Instructions

General

The SC861 can be used to control one or more sun protection systems. The
threshold values for sun protection and wind control can be set with the follow-
ing transmitters: Centronic SunWindControl SWC441, SWC411 and SWC545.
This device is excellent because it is so easy to operate.
Note
The SC861 is equiped with a solar cell for power supply

Warranty

Becker-Antriebe GmbH will be released from all warranty and product liability
obligations if the customer modifi es the equipment without prior approval from
Becker-Antriebe GmbH or if the equipment is installed incorrectly and/or con-
trary to the specifi ed installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and offi cial regu-
lations governing manufacture and advice to customers, especially the EMC
regulations.
This product is subject to technical developments and improvements. Please
refer to the current sales brochure for the precise product specifi cations.
10