Intended Use - Becker Centronic SensorControl SC431 Notice D'utilisation

The SC431 may be used to operate roller shutters and sun protection systems
only.
• Please note that radio sets cannot be operated in areas with increased risk of
interference (e.g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which a
malfunction in the handheld transmitter or receiver does not present a risk to
persons, animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic fi elds.
Radio sets transmitting at the same frequency could interfere with re-
ception.
It should be noted that the range of the radio signal is restricted by leg-
islation and constructional measures.

Intended use

DE
GB
FR
NL
15