System Requirements; Driver Installation - i-tec C31TRAVELDOCKPD Mode D'emploi

2x USB-A 3.0 ports for connecting USB 3.1/3.0/2.0 devices for high-speed
ź
data transmission up to 5 Gbps
1x USB-C Power Delivery / Data Port – Power Delivery with the profile 4 (max.
ź
60W) for charging laptops, tablets or smartphones with support for Power
Delivery. To this port you can connect an original or a universal AC power
adapter with USB-C connector, it ensures the constant charging of your
laptop, tablet or smartphone during your work. This port also enables data
tranfer, therefor can be used to connect modern data devices with USB-C
connector (e.g. Ethernet adapter, USB Flash Drive...) However the port does
not enable video tranfer.
1x Ethernet GLAN RJ-45 port for fast network and Internet access with
ź
Gigabit Ethernet connection, it supports speeds of 10 / 100 / 1000 Mbps
1x integrated USB-C 3.1 cable for connecting the docking station to laptop,
ź
tablet or smartphone
Powered through USB bus (no power adapter is needed) or through USB-C
ź
PD / Data port
Chipset: VL102 & PS176 & VL817 & RTL8153B & RTD2166
ź
OS: Requires USB-C interface with „DisplayPort Alternate Mode" and „Power
ź
Delivery" support (not all devices / systems with USB-C interface support
this as standard) or Thunderbolt 3 port – Windows 10 32/64bit, Mac OS X,
Chrome OS and Android 6 (Google) with Intel Broadwell Processor and R51
and higher
Product dimensions: 129 x 69 x 17 mm
ź
Product weight: 92 g
ź

SYSTEM REQUIREMENTS

Hardware requirements: Requires USB-C interface with „DisplayPort Alternate
Mode" and „Power Delivery" support (not all devices / systems with USB-C
interface support this as standard) or Thunderbolt 3 port
Operating system: Windows 10 32/64bit, Mac OS X, Google (Chrome OS and
Android 6 and higher) with latest updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking station are
installed automatically on the system. Before installation make sure that your
system has installed the latest drivers for your device and updated BIOS.
Quick Start
EN
04