Connecting Usb Devices - i-tec C31TRAVELDOCKPD Mode D'emploi

i-tec USB-C Travel Dock 4K HDMI/VGA
Mac OS X: Installation of the drivers in Mac OS X is automatic. Before installation
make sure that your Mac has installed the latest OS for your device.
CONNECTING A HDMI MONITOR
The docking station is equipped with 1x HDMI 4K Ultra HD port for the connection
of an external monitor or beamer with a HDMI interface. For displaying your
images you can use a modern plazma or LCD monitors and TVs. The graphic chip,
which is the heart of the docking station, supports up to 4K resolution
3840x2160@30Hz. Connect the monitor to the docking station using a high-
quality HDMI cable. During installation of an additional monitor the screen of the
notebook or tablet can flicker which is a standard condition.
CONNECTING A VGA MONITOR
The docking station is equipped with 1x VGA Full HD port for the connection of an
external monitor or beamer with a VGA interface. For displaying your images you
can use a plazma or LCD monitors and TVs. Connect the monitor to the docking
station using a VGA cable. During installation of an additional monitor the screen
of the notebook or tablet can flicker which is a standard condition.
It is not possible to use both graphic outputs simultaneously, a single monitor
only can be connected to the docking station (HDMI or VGA).
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router / switch
and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.

CONNECTING USB DEVICES

You can use USB 3.0 ports for connecting your keyboard, mouse, external hard
drive, printer and other devices or you can use it for connecting a USB HUB, which
will give you more free USB ports.
CHARGING
The docking station supports charging of USB mobile devices, such as smart
phones, e-book readers, multimedia players, navigation devices, and tablets.
Simply connect the device that you want to charge using the original cable to the
USB port of the docking station. If the device is not charged, connect the original
USB-C power adapter to the USB-C Power Delivery port of the docking station.
EN
05