Publicité
SPECIFICATIONS
Cat. No. ...................................................2776R-20
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
IC/FCC ID ...................................5123A-13/QOQ13
High Voltage Field Rating ........................... 34.5 kV
Max Capacity *
†
Single Conductor ................1500 MCM Cu, 15KV
3 Conductors .......................350 MCM Cu, 15 KV
3 Conductor Single Cable............3x500 MCM Cu
* Do Not Cut Steel
In Remote Mode, only make Single Conductor cuts
†
Replacement Blades ............Cat. No. 49-16-2774
Remote Cat No. .................................. 22-80-2776
Volts ...................................... 6 DC (1.5 V AA x 4 )
Weight ...................................................... 15.7 lbs
Weight .......................................................... 19 lbs
(With M18™ HD 12.0 battery pack)
Lanyard................. MILWAUKEE Energy Absorbing
Recommended Ambient
Operating Temperature .................... 0°F to 125°F
FUNCTIONAL DESCRIPTION
6
5
3
2
4
1
1. Blade retainer
2. Blades
3. Front handle
4. Pivot pin/grounding lug
5. Trigger lock
6. LED
7. Trigger
8. Release trigger
9. Handle
10. ONE-KEY battery door
11. Remote cut light
12. Remote cut switch
13. Hanger
1500 MCM Al, 46KV
3x750 MCM Al
(Tool-Only)
7
10
12
8
11
9
15
14
14. Remote power
switch 1
15. Remote button 2
16. Remote button 3
17. Remote cut
indicators
Volts
Direct Current
WARNING
property damage, work on deenergized
lines when possible. Tool is not
insulated. Should work on energized
lines be required, ensure all proper
precautions, including those contained
in NFPA 70E, have been taken first.
WARNING
moving parts. Laceration and
amputation can occur.
To reduce the risk of injury, wear safety
goggles or glasses with side shields
when operating or servicing the tool.
Read operator's manual.
UL Listing for Canada and U.S.
13
WARNING
cific charging instructions, read the operator's
manual supplied with the charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
is not in use.
To insert the battery, slide the pack into the body
16
of the tool. Make sure it latches securely into place.
17
5
SYMBOLOGY
To reduce the risk of arc
flash, electric shock and
Keep hands away from
all cutting edges and
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
Always lock the trigger or remove
the battery pack any time the tool
Publicité
