Safety Instructions For Installation And Maintenance Work; Unauthorised Modification And Manufacture Of Spare Parts; Improper Use; Transport And Interim Storage - Wilo Control-FLA Notice De Montage Et De Mise En Service

English
• If hot or cold components on the product/the unit
lead to hazards, local measures must be taken to
guard them against touching.
• Guards protecting against touching moving com-
ponents (such as the coupling) must not be remo-
ved whilst the product is in operation.
• Leakages (e.g. from the shaft seals) of hazardous
fluids (which are explosive, toxic or hot) must be
led away so that no danger to persons or to the
environment arises. National statutory provisions
are to be complied with.
• Highly flammable materials are always to be kept
at a safe distance from the product.
• Danger from electrical current must be eliminated.
Local directives or general directives [e.g. IEC, VDE
etc.] and local energy supply companies must be
adhered to.
2.6 Safety instructions for installation and
maintenance work
The operator must ensure that all installation and
maintenance work is carried out by authorised and
qualified personnel, who are sufficiently informed
from their own detailed study of the operating
instructions.
Work to the product/unit must only be carried out
when at a standstill. It is mandatory that the pro-
cedure described in the installation and operating
instructions for shutting down the product/unit
are complied with.
Immediately on conclusion of the work, all safety
and protective devices must be put back in posi-
tion and/or recommissioned.
2.7 Unauthorised modification and manufacture of
spare parts
Unauthorised modification and manufacture of
spare parts will impair the safety of the product/
personnel and will make void the manufacturer's
declarations regarding safety.
Modifications to the product are only permissible
after consultation with the manufacturer. Original
spare parts and accessories authorised by the
manufacturer ensure safety. The use of other
parts will absolve us of liability for consequential
events.
14

2.8 Improper use

The operating safety of the supplied product is
only guaranteed for conventional use in
accordance with Selection 4 of the operating ins-
tructions. The limit values must on no account fall
under or exceed those specified in the catalogue/
data sheet.

3 Transport and interim storage

Immediately after receiving the product:
• Check product for transport damage.
• In the event of damage in transit, take the neces-
sary steps with the forwarding agent within the
respective time limits.
CAUTION! Risk of material damage!
Incorrect transport and interim storage can
cause property damage.
•The switchgear is to be protected against mois-
ture and mechanical damage.
•It must not be exposed to temperatures outside
the range of -20°C to +60°C.

4 Intended use

The FLA switchgear is used exclusively for auto-
matic control of pressure boosting systems for fire
extinguishing purposes in accordance with
DIN14462 consisting of one or two pumps.
The device is used in residential buildings, hotels,
hospitals, administrative and industrial buildings
in order to supply type F fire hose reels.
No other devices for other purposes may be ins-
talled in the switchgear.
The intended use includes complying with these
instructions.
Any other use is regarded as improper use.
Wilo SE 06/2015