Publicité
described in these instructions. We cannot accept any
liability for accidents and damage caused by unau-
thorised repair attempts, incorrect use or misuse.
In the case of technical problems
• The machine does not start up:
Check whether the current socket is live. Check
whether the power cable is undamaged. If neither
case applies, take the chainsaw to a specialised work-
shop or the works after-sales service.
• Chain does not run:
Check position of handguard (see fig. 10). Chain only
runs if handguard brake is released.
• Sparks fly at the motor:
Motor or carbon brushes damaged. Take the chainsaw
to a specialised work-shop or the works after-sales
service.
• Oil does not flow:
Check the oil level. Clean the oil flow openings in
the bar (see also the corresponding hints of "Main-
tenance and servicing). If this is not successful, take
the chainsaw to a specialised work-shop or the works
after-sales service.
Attention: Any maintenance or repair work go-
ing beyond that described in these Operating
Instructions may only be carried out by author-
ised persons or the works after-sales service.
Attention: If the power supply lead of this
device shows any defects, the lead must be
replaced by an authorized repair shop only
or through the manufacturer's own service
personnel, as this work requires special tools.
Repair Service
Repairs to electric power tools should only be carried out
by specialist electrical personnel.
Always keep the original packaging for a possibly re-
quired shipping of the tool.
Information for environmental protection/
disposal
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its imple-
mentation in national law, waste electric tools must be col-
lected separately for environmentally-compatible re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
GB | Operating Instructions
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
Spare parts
If you need accessories or spare parts, please contact our
Service department.
When working with this tool, do not use any accessory parts
other than those recommended by our company. Otherwise
the operator or others in the vicinity could suffer serious
injuries, or the tool could be damaged.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
points.
10
Publicité
