Publicité
GB
MT
user and result in damage to the
device. The operator or user of the
machine is responsible for any acci-
dents or personal injury and/or ma-
terial damage to third parties or their
property. The machine is intended to
be used by do-it-yourselfers. It was
not designed for heavy commercial
use. The warranty is void in the case
of commercial use. The manufacturer
is not liable for damage caused by
improper use or incorrect operation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material
properly.
• Water Barrel Pump
• Aluminium pipe with hose guide,
hose and quick connector
• Paper bag:
• Pipe holder
• Hose connector with shut-off
valve
• Translation of the original instruc-
tions
Overview
The illustrations for the
device can be found on
the front fold-out page.
1 Hose
2 Hose guide
3 Pipe holder
4 Carrying handle
5 Power cord
6 Holder (Float switch)
7 Line (Float switch)
8 Housing
9 Float switch
10 Pump foot
20
11 Water outlet
12 Sealing ring
13 Coupling nut (Water outlet)
14 Aluminium pipe
15 Coupling nut (Hose guide)
16 Quick connector
17 Hose connector
18 Shut-off valve
A
19 Filter
20 Filter cap
Description of functions
The pump is equipped with a float
switch that automatically switches
the device on or off depending on the
water level.
In case of overload, the device is
switched off by the built-in thermal
protection switch. After cooling down,
the motor starts up again by itself.
Please refer to the descriptions below
for information on how the operating
elements work.
Technical data
Water Barrel Pump ..... PERP 400 A1
Rated voltage U ...........230 V∼, 50 Hz
Rated input power P ................ 400 W
Protection class .................................I
Protection type ............................IPX8
Length Power cord .....................10 m
Weight ...................................... 3.8 kg
Suspended matter size ⌀ ....... ≤3 mm
Operating depth ......................... ≤7 m
Flow rate Q ..........................≤4000 l/h
Discharge head H .....................≤13 m
Minimum water level, Initial start-up
..................................................60 mm
Residual water level .................. 5 mm
Water temperature .................. ≤35 °C
Water outlet ..................................G1"
Publicité
