Publicité
Mounting
When installing the unit, the trussing or area of installation must be able to hold 10 times the
weight without any deformation. When installing the unit must be secured with a secondary
safety attach-ment, e.g. and appropriate safety cable. Never stand directly below the unit when
mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-ing working load limits,
installation material being used, and perodic safety inspection of all installation material and
unit. If you lack these qualifcations, do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
The VISION CONTROL Arc Par 710B 7x10W RGBW IP65 is fully operational in three different
mounting positions, hanging upside-down from a ceiling, set on a flat level surface or mount the
unit on its side. Be sure this fxture is kept at least 0.5m away from any flammable materials
(decoration etc.). And you'd better use and install the supplied safety cable as a safety measure
to prevent accidental damag
and/or injury in the event the clamp fails (see next page).
Publicité
