Iridium VISION CONTROL Arc Par 710B 7x10W RGBW IP65 Manuel D'utilisation page 11

Displayer Introduction
1. When you enter DMX Mode,it will be showed DMX,when you enter SLAVE Mode,it will
be showed SLAVE.
2. This shows the condition of signal transmission. Green is connected.Red is
disconnected.
3. This shows the temperature of the lights.
4. This shows the menus you can select.
5. This shows the condition of key lock. "Key lock open" means it is open and "Key lock
off" means it is close.
6. This shows the condition of wireless signal. Green is connected.Red is disconnected.
7. This shows the battery's electric quantity.