Publicité
Introduction
Packaging: Thanks for your purchasing the VISION CONTROL Arc Par 710B 7x10W RGBW IP65.
All the lights have been
checked and are in excellent operating condition. Please check the shipping carton
first,because there may be damage occurred during the shipment.Then check the lights
carefully and be sure that the lights is intact and works normally.In the event damage has
been found, spare parts are missing or the lights works abnormally,please contact us for
further instructions. And please don't return the lights to the dealer before contacting us.
Introduction: The VISION CONTROL Arc Par 710B 7x10W RGBW IP65 has three operating
modes: DMX mode, Auto mode and Master/Slave mode.And the lights has five DMX
modes,including channel 2, channel 3 , channel 5, channel 8 and channel 11.
In addition, you can connect several pieces of lights in DMX mode and set one in Auto
mode, and the others in Master/Slave mode.And then all the lights in Master/Slave mode
will run following the one in Auto mode.Using fog or special effect smoke,you can see
better showing effect.
SAFETY AND HANDLING
Before you operate this unit read the manual carefully. Always make sure to include the
manual if you pass/rent/sell the unit to another user. Keep in mind that this manual
cannot address all possible dangers and environments. Please use your own caution
when operating. This product is for professional use only. It is not for household use.
•Do not operate the unit in areas of high temperature conditions. It will
cause abnormal function or damage the product.
•Always use a suitable safety wire when mounting the light overhead.
•Connect the safety wire only to the intended safety mount.
• Always follow local safety requirements.
•Only qualified personnel may repair this product.
•Do not open the product housing.
•Do not apply power if the light is damaged.
Publicité
