Publicité
Connection
Press "ENTER" button and then "UP" or "DOWN" button until "SET UP" is showed.
Press "ENTER" button and then "UP" or "DOWN" button until "Wirless rel" is displayed, press
ENTER button. Then press DMX Mode is ok.
Then, until Green wireless signal is displayed. Then Wireless DMX connected success.
About the condition of wireless signal, Green represents the successful setting, while red
represents the signal is unsuccessful.
Release wireless DMX signal
Press "ENTER" button and then "UP" or "DOWN" button until "Wirless rel" is showed.
Press "ENTER" button and then "UP" or "DOWN" button until "press +/-" is displayed, press "UP"
or "DOWN" button, long press "UP" or "DOWN" button about 5-6 seconds. Until "Initialization"
to "Release finish" is displayed. It means release signal successfully.
Note: The wireless controller hangs on will be in a good position,the antenna of the
products should be face to the controller can be used within 200M.
Publicité
