Publicité
11) Power State - You can adjust the power state in this menu.
12) AC Failure-In this menu,you can test the power supply system for proper operation.
1. Press "ENTER" button and then UP or DOWN button until "AC Failure"is showed.
2. Press "ENTER" button,and "ON" or "OFF" will be showed.If you select"on", emergency light
function can be activated after power failure.
13) Factory Reset-In this menu,you can reset all the value of the system.
INFORMATION-In this menu, you can learn about the information of software, hardware,RDM
UID, current time,serial number, product ID and the working time of the light.
1. Press "ENTER" button and then UP or DOWN button until "INFORMATION" is showed.
2. Press "ENTER" button, and "Software","Hardware", "RDM UID","current time","serial
number","product ID" and the "working time" of the light will be showed. Then press ENTER,
and you can see seven items as below:
1) Software - This item displays the Software information.
2) Hardware - This item displays the Hardware information.
3) RDM UID - This item displays the RDM information about the light.
4) Current time - This item displays the current time about the light.
5) Working time - This item displays the working hours about the light.
6) Product ID - This item displays the Product ID about the light.
7) Serial number- This item displays the Serial number about the light.
Publicité
