Publicité
1. Press "ENTER" button and then UP or DOWN button until "EDIT" is showed.
2. Press "ENTER" button, and open the "EDIT" mode to edit the custom programs from"PR.01" to
"PR.11".And there are 32 scenes that can be edited in each custom program.
3. You can edit a scene by adjusting the value of "RED (0~255)", "GREEN (0~255)", "BLUE
(0~255)", "WHITE (0~255)", "FADE (0~30)", "FLASH(0~30)", "STROBE (0~30)" & "TIME (0~255)" as
you like.
Then the data will be saved, when you press the ENTER button for 5 seconds.
UPLOAD-In this menu,you can connect several pieces of lights with signal cables and set one
light as the MASTER and others in SLAVE mode.Then upload the custom program in the MASTER
light to the lights in SLAVE mode.
1. Press "ENTER" button and then UP or DOWN button until "UPLOAD" is showed.
2. Press "ENTER" button to upload the custom programs from the MASTER light to the SLAVE
ones.
Wireless-In this menu,you can transmitter, receiver and release wireless signals.
1. Press"ENTER"button and then UP or DOWN button until "Wireless" is showed.
2. Press"ENTER""button,and "transmitter", "Receiver" or "Release" will be showed.
Then press ENTER,and you can see three items as below:
1)Transmitter - In this item,you can select "ON"or "OFF".If you select ON,you can use the
wireless transmitter function.And if you select OFF,wireless transmitter will be turned off.
2)Receiver- In this item,you can select "ON"or "OFF".If you select ON,you can use the wireless
reception function.And if you select OFF,wireless reception will be turned off.
3)Release-In this item, you can clear wireless signals."SUCCEESS" will be displayed when the
wireless signal is successfully cleared.
SET UP-In this menu, you can adjust the value of the function.
1. Press "ENTER" button and then UP or DOWN button until "SET UP" is showed.
2. Press "ENTER" button, and there will be thirteen options. Then,press ENTER to select the
option and press UP or DOWN button to select the value you desire as below.
1) Remote - In this item, you can select "ON" or "OFF". If you select ON, the remote mode will be
on.
And if you select OFF , the remote mode will be off.
2) Key locks - You can select whether the password is on or off in this menu , and the password is
[ UP ] + [ DOWN ]+ [ UP ] + [ DOWN ] + .If you select "on",then you have to input the password
before pressing the buttons.Otherwise,the light won't respond to your order.
3) LCD Black- In this item,you can select "ON" or "30S".If you select ON,the displayer will be on
all the time.And if you select 30S,the displayer will extinguish about 30s later.
4) Max temp - You can set the your desired Max working temperature about the light in this
menu.
When the working temperature of the light exceeds the Max temperature, the color of letter
"Temp xx" showed in the menu will change from white to yellow.Meanwhile, the light will adjust
the working temperature automatically.
5) Dimmer ALL - You can adjust the brightness of color in this menu.
6) LED Power - You can choose the battery usage mode you want.
7) Rate - You can choose the refresh frequency you want.
8) Dimmer Curve - You can choose the dimmer curve you want.
9) ID number - You can select an ID Number in this menu.Then, you can adjust the value of
channel 11 to the corresponding scope and control the light individually with control console.
10) White Balance - You can adjust the brightness of each color.
Publicité
