Publicité
Input Select-In this menu,there are DMX Mode, Slave mode and APP control Mode for you to
choose.
1. DMX Mode-In this menu,you can connect several pieces of lights with DMX cable and control
them with control console.
1) "Channel [xx]" will be showed, "X" represents the showed DMX channel mode. You can press
the UP or DOWN button to select your desired Channel mode.
2) "xxx" will be showed, "x" represents the showed address. You can press the UP or DOWN
button to select your desired address.
3) DMX STATE-In this menu,you can choose the DMX signal you desired. Press "ENTER" and you
can choose "BLACKOUT" or "DMX HOLD";"BLACKOUT" means cut off the DMX signal and "DMX
HOLD" means connect DMX signal.
2. SLAVE MODE-In this menu, you can choose one light as the MASTER light and other lights in
SLAVE Mode will run follow the MASTER light.
1) Press "ENTER" and then press "UP" or "DOWN" to "SLAVE Mode".
2) Press "ENTER" and "SLAVE" will be showed, then press "ENTER" to choose.
3. Vision APP-In this menu, you can use APP control function via a Bluetooth connection to your
phone.
1) Press "ENTER" button and then UP or DOWN button until "Vision APP " is showed.
2) Press "ENTER" button, and "unlink" will be showed.Then will showed confirm after click enter
and click enter again.
3) Press "up or down" button, and the APP connection status and signal status will be displayed.
Manual mode-In this menu, you can adjust the value of color ,CTO and strobe speed as you like.
1. Press "ENTER" button and then UP or DOWN button until "Manual mode" is showed.
2. Press "ENTER" button, and there are eight options. Then press ENTER to select the option and
press UP or DOWN button to select the value you desire as below:
1) RED - You can adjust the red brightness in this menu.
2) GREEN - You can adjust the green brightness in this menu.
3) BLUE - You can adjust the blue brightness in this menu.
4) WHITE - You can adjust the white brightness in this menu.
5) COLOR -You can select 50 static color in this menu.
6) CTO - You can adjust the CTO in this menu.
7) STROBE - You can adjust the strobe speed in this menu.
8) Dimmer - You can adjust the brightness of color in this menu.
Auto Mode-In this menu, you can select your desire Auto mode and adjust the running speed.
1. Press "ENTER" button and then UP or DOWN button until "Auto mode" is showed.
2. Press "ENTER" button, and "SPEED" or "AUTO" will be showed. Then press ENTER and you can
see two items as below:
1) SPEED - You can select your desired speed in this menu.
2) AUTO - You can select your desired auto mode in this menu.
CUSTOMER-In this menu,you can select the AUTO program edited in the "EDIT" menu.
1. Press "ENTER" button and then UP or DOWN button until "CUSTOMER" is showed.
2. Press "ENTER" button, and there are 11 pre-programmed mode edited in the "EDIT"menu.
EDIT Mode-In this menu, you can edit your desired AUTO program.
Publicité
