EIBENSTOCK ESS 1300 Notice Originale page 16

Ensure that there are no risks presented by sparks produced during
use, which may e.g. strike people or ignite flammable substances.
Always lead the mains and extension cable as well as the extraction
hose to the back away from the machine.
Power tools have to be inspected by a specialist in regular intervals.
Never carry the machine at its cable.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
During use, the operator and other persons standing nearly have to
wear suitable ear protectors, a dust mask, protection goggles as well
as protective gloves.
Make sure that persons in the work space are not endangered by
particles flying around.
Keep the handles dry, clean and free of oil and grease.
Always hold the tool with both hands.
Caution! The tool continues to run after the machine has been
switched off.
For further safety instructions, please refer to the enclosure!
Electrical Connection
First, check the correspondence between voltage and frequency against
the data mentioned on the identification plate.
Voltage differences of + 6 % to – 10 % are allowed.
The machine is equipped with a soft start which prevents that swift
automatic circuit breakers are unintentionally triggered.
Switching on and off
The ESS 1300 is equipped with a lock-off button against unintentional
switch-on.
2
1
Switching-on: push the on/off switch
forward (1) and then down (2)
Switching-off: release the on/off switch
16