Residual Risks; Preparation; Control Elements - Parkside Performance Ppstda 20-Li A1 Traduction Des Instructions D'origine

kickback and can safely put down
the power tool.
• Use only undamaged saw blades
in perfect condition. Bent or blunt
saw blades can break, adversely
affect the cut or cause kickback.
• Do not brake the saw blade after
switching the device off by ap-
plying side pressure. The saw
blade may be damaged, break or
cause a kickback.
• Do not touch any objects or the
ground with the saw running.
There is a risk of kickback.
• Hold the power tool tightly with
both hands while working and
ensure a secure footing. The
power tool is guided more securely
with both hands.
• Switch the appliance off imme-
diately if the sawing blade jams.
Force apart the saw cut and pull
the saw blade out carefully. This
can lead to loss of control over the
power tool.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause
fire and electric shock. Damaging
gas lines can lead to explosion.
Breaking water pipes causes prop-
erty damage.
• Always wait until the power tool
has come to a complete stop be-
fore placing it down. The applica-
tion tool can jam and cause you to
lose control of the power tool.

Residual risks

There will always be residual risks
even if you operate this device ac-
cording to the instructions. The fol-
lowing hazards may occur in connec-
tion with the type and design of this
device:
• Hearing damage if suitable ear pro-
tection is not worn.
• Health injuries resulting from the
effect of hand/arm vibration in the
event that the tool is used over a
longer period of time or is not used
and maintained properly.
• Cutting injuries
WARNING! Danger due to elec-
tromagnetic field generated while the
tool is in operation. Under certain cir-
cumstances, this field may negat-
ively affect active or passive med-
ical implants. In order to reduce the
danger of serious or fatal injuries, we
recommend that individuals who wear
medical implants should consult their
doctor and the manufacturer of the
implant before operating the tool.

Preparation

WARNING! Risk of injury due to
unintentional start-up. Only insert
the battery into the device once the
device is fully prepared for use.

Control elements

Familiarise yourself with the operating
elements before using the device for
the first time.
Switch lock (7)
• Locks the on/off switch against un-
intentional operation.
• Unlock: Press
On/Off switch (8)
• Switching on: Press
The LED work light (21) lights up.
• Switching off: Release
Pendulum stroke switch (14)
Set pendulum movement of the saw
blade in 4 positions:
• 0 - no pendulum motion
GB MT
33