Proper Use; Delivery/Accessories; Overview - Parkside Performance Ppstda 20-Li A1 Traduction Des Instructions D'origine

Proper use

This device is only intended for the
following uses:
• Sawing plastic, wood and light
metal with firm support
• Sawing straight and curved cuts as
well as mitre cuts (only wood and
plastic) of up to 45°
• Only operate in dry areas.
Please note the information on saw
blade types.
Any other use that is not expressly
permitted in this instruction manual
may pose a serious hazard to the
user and result in damage to the
device. The operator or user of the
machine is responsible for any acci-
dents or personal injury and/or ma-
terial damage to third parties or their
property. The machine is intended to
be used by do-it-yourselfers. It was
not designed for heavy commercial
use. The warranty is void in the case
of commercial use. The manufacturer
is not liable for damage caused by
improper use or incorrect operation.
The device is part of the
X 20 V TEAM series and can be
operated with batteries of the
X 20 V TEAM series. Batteries of
the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material
properly.
• Cordless Jigsaw
• 1 Wood saw blade (Swiss Made),
HOLZ – 2 side clean curve
• 1 Wood saw blade (Swiss Made),
HOLZ – 2 side clean
• Splinter guard (pre-assembled)
• Adapter for external dust extraction
(pre-assembled)
• Reducer piece (pre-assembled)
• Parallel guide
• Storage case
• Translation of the original instruc-
tions
The rechargeable battery and char-
ger are not included in delivery.

Overview

The illustrations for the
device can be found on
the front and back fold-
out page.
1 Control panel
2 "Connected" display
3 Charge level indicator on the
device
4 Stroke rate display
5 Stroke rate button
6 Overtemperature display
7 Switch lock
8 On/Off switch
9 Handle (Insulated gripping sur-
face)
10 Battery holder
11 Reducer piece
12 Adapter for external dust extrac-
tion
13 Footplate
14 Pendulum stroke switch
15 Chuck
16 Guide roller
17 Mount (Parallel guide)
18 Splinter guard
19 Retaining screw
20 Release for the chuck
21 LED work light
22 Auxiliary handle (Insulated grip-
ping surface)
GB MT
27