Safety Information For Reciprocating Saws - Parkside Performance Ppstda 20-Li A1 Traduction Des Instructions D'origine

GB MT
small metal objects, that can
make a connection from one ter-
minal to another. Shorting the
battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact acci-
dentally occurs, flush with wa-
ter. If liquid contacts eyes, ad-
ditionally seek medical help. Li-
quid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or
tool that is damaged or modi-
fied. Damaged or modified batter-
ies may exhibit unpredictable be-
haviour resulting in fire, explosion
or risk of injury.
f) Do not expose a battery pack or
tool to fire or excessive temper-
ature. Exposure to fire or temper-
ature above 130 °C may cause ex-
plosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the temper-
ature range specified in the in-
structions. Charging improperly or
at temperatures outside the spe-
cified range may damage the bat-
tery and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the
safety of the power tool is main-
tained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.
32
Safety information for
reciprocating saws
• Hold the power tool by insulated
gripping surfaces, when per-
forming an operation where the
cutting accessory may contact
hidden wiring. Cutting accessor-
ies contacting a "live" wire may
make exposed metal parts of the
power tool "live" and could give
the operator an electric shock.
• Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your
hand or against the body leaves it
unstable and may lead to loss of
control.
• Only use accessories recom-
mended by PARKSIDE. Unsuit-
able accessories may cause elec-
tric shock or fire.
Further safety instructions for
reciprocating saws
• Keep hands away from the saw-
ing area. Do not reach underneath
the workpiece. Upon contact with
the saw blade there is a risk of in-
jury.
• Only when the power tool is
turned on should the sawing
blade be moved against the
workpiece. Otherwise, there is a
risk of kickback if the attachment
tools jam in the workpiece.
• Make sure that the footplate is
secure during sawing. A tilted
saw blade may break or cause a
kickback.
• After you have finished work,
turn the power tool off and do
not pull the saw blade out of the
cut until it has come to a stand-
still. In this way you will avoid any