Page 1
Page 1 of 23 LP0384BK FITTING INSTRUCTIONS FOR LP0384BK LICENCE PLATE BRACKET This kit contains the items pictured and labelled over page. Some parts may be shown for clarity of instructions only. Do not proceed until you are sure all parts are present.
Page 2 of 23 LP0384BK TOOLS REQUIRED GENERAL TORQUE SETTINGS Set of metric Hex keys to include M4 BOLT = 8Nm • 5mm & 6mm. M5 BOLT = Set of metric sockets and wrench. • To include 8mm, 10mm & 12mm.
Page 9
Page 9 of 23 LP0384BK Picture 27 Picture 28 FITTING GUIDE Disassembly Instructions: • Firstly, remove the seat unit via the bolt hidden behind the rubber bung pictured in Picture 1. • Once the bolt has been removed, slide the seat backwards and upwards and place to one side.
Page 10 of 23 LP0384BK • Remove the original indicators & sub-loom (wiring inside the original tail unit) for later use. • Safely store all original components. Excluding: Seat bolt & it’s rubber bung, 4X telematics unit tray bolts, indicators & tail-light wiring sub-loom. (These will be re-used with the R&G tail tidy)
Page 11
Page 11 of 23 LP0384BK • Re-attach all original wiring (via the clips & supplied cable ties) panels and seat unit, then cover the seat bolt hole with the original rubber bung (Pictures 17 & • Insert the supplied M6x25mm cap head bolts (Item 13) into the mounting block (Item 7) shown in Picture 19 then attach the block to the swingarm shown in Pictures 25 &...
Page 12
Page 12 of 23 LP0384BK NOTICE DE MONTAGE LP0384BK SUPPORT DE PLAQUE E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...
Page 20 of 23 LP0384BK Photo 27 Photo 28 GUIDE DE MONTAGE Notice de démontage : • Commencez par retirer le siège à l'aide du boulon caché derrière le bouchon en caoutchouc (photo 1). • Une fois le boulon retiré, faites glisser le siège vers l'arrière et le haut, puis mettez-le de côté.
Page 21
Page 21 of 23 LP0384BK • Retirez les clips en surbrillance et débranchez les 3 connecteurs de câblage. • Retirez les clignotants et le faisceau secondaire d'origine (câblage à l'intérieur du boîtier arrière d'origine) pour une utilisation ultérieure. • Rangez soigneusement tous les composants d'origine. À l'exception de : la vis de selle et son bouchon en caoutchouc, les 4 vis du plateau de l'unité...
Page 22 of 23 LP0384BK • Acheminez ce câblage le long du sous-châssis, puis jusqu'au pivot du bras oscillant (plus facile à réaliser en retirant les panneaux latéraux), puis remontez par le guide de la durite de frein le long du bras oscillant (Il devrait y avoir deux boulons à...
Page 23
Page 23 of 23 LP0384BK purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty goods.