Installation; Connecting The Power Supply; Control Panel; Display Automower ® 105 - Husqvarna AUTOMOWER 105 Manuel D'utilisation

3.1 Connecting the power supply

Take the following into consideration when planning
where to place the power supply:
• Close to the charging station
• Protection from rain
• Protection from direct sunlight.
WARNING: The robotic lawnmower is only to be
used with a power supply unit supplied by
Husqvarna.
The power supply must be placed where it is well
ventilated and must be placed under a roof. If the power
supply is connected to an electrical socket outdoors, this
must be approved for outdoor use. It is recommended to
use an earth fault-breaker (RCD) when connecting the
power supply to the wall socket.
WARNING: Applicable to USA/Canada. If power
supply is installed outdoors: Risk of Electric
Shock. Install only to a covered Class A GFCI
receptacle (RCD) that has an enclosure that is
weatherproof with the attachment plug cap
inserted or removed.
No parts of the power supply must be changed or
tampered with. For example the low voltage cable must
not be shortened or extended. Low voltage cables with 3
m / 10 ft or 20 m / 66 ft length are avalible as optional
accessories.
WARNING: Do not under any circumstances
mount the power supply at a height where there
is a risk it can be submerged in water (at
minimum 30 cm / 12" from the ground). It is not
permitted to place the power supply on the
ground.
min 30 cm / 12"
WARNING: No parts of the power supply must
under any circumstances be changed or
tampered with. The low voltage cable must not
be shortened or extended.
WARNING: Use the plug to disconnect the
charging station, for instance before cleaning
the charging station or repairing the loop wire.
772 - 001 - 29.05.2018

3 Installation

WARNING: Place the low voltage cable and
adjust the cutting height so that the blades on
the blade disc can never come in contact with it.
For more instructions on how to do a proper installation,
see chapter Installation in the complete Operator's
manual on Husqvarna's website www.husqvarna.com.

3.2 Control panel

All commands and settings for the robotic lawnmower
are made via the control panel. All functions are
accessed via a number of menus.
The control panel consists of a display and a keypad. All
information is shown on the display and all input is done
using the buttons.
The display texts are shown in English in the manual,
but you will see the texts on the product display in the
choosen language.
3.3 Display Automower
When the STOP button has been pressed and the hatch
is opened, the operation window appears showing the
time, selected operating mode, number of mowing
hours, battery status and timer setting.
• The clock shows the current time.
• Date shows the current day.
• The number of operating hours indicates the number
of hours since the day of manufacture that the
robotic lawnmower has been in operation. The time
that the robotic lawnmower has spent mowing or
searching for the charging station is counted as
operating time.
• AUTO , MAN or HOME show which mode of
operation is selected.
• The battery status shows the remaining battery
charge.
• The ECO symbol is displayed if the robotic
lawnmower is set in
• The clock symbol indicates when the timer settings
are set. The clock symbol is black when the robotic
lawnmower is not allowed to mow due to a timer
setting.
MENU text illustrates that the main menu can
• The
be reached by pressing the multi-choice button that
is located under the text.
3.4 Keypad Automower
The keypad consists of 4 groups of buttons:
®
105
ECO mode .
®
105
Installation - 11