Johnson AURUM R290 M Serie Guide D'utilisation page 69

Model A
1 phase 4/6 kW 333
360
1 phase 8/10 kW
1 phase 12/14/16 kW 415
3 phase 12/14/16 kW 415
2.5.2 Manual transportation
WARNING
Risk of injury from lifting a heavy weight.
Lifting weights that are too heavy may cause
injury to the spine, for example.
Note the weight of the product.
Have four people lift the product.
1. Take into consideration the weight distribution
during transportation. The product is significantly
heavier on the compressor side than on the fan
motor side. (see content above for the barycenter)
2. Protect the casing sections from damage. Using
paper edge protector under the unit when lift the unit.
3. After transportation, remove the transport straps.
4. During transportation, do not tilt the product to an
angle larger than 45°.
2.5.3 Lifting
Use lifting tools with transport straps or a suitable
hand truck.
Unit on the pallet:
Pass the transport straps through the holes on the
left and right sides of the pallet properly.
No pallet under the unit:
The transport straps can be fitted into the dented
position at the base frame that are made specifically
for this purpose. Using paper edge protector under
the unit when lifting the unit.
A
B
Paper edge protector
B C D E F
528 210 717 91 91
550 234 865 129 100
715 200 865 129 100
715 200 865 129 100
12
G H I J K
1 299 426 121 644 379
1 385 523 192 656 363
1 385 523 192 656 363
1 385 523 192 656 363
CAUTION
The barycenter of the product and the hook
should be kept in a straight line in the vertical
direction to prevent excessive tilting.
2.6 Parts to be removed
To open the unit, see 6.1 Opening the Electrical Box
Cover.
CAUTION
Move the parts above after unit installation.
(mm)
L M N
90 375 71
77 456 68
77 456 68
77 456 68
Remove the
transportation support
For 12/14/16 kW
V.1