Publicité
white dot button in the lower right corner of the power display, which can be
replaced by pressing the display content: current voltage value, current
power %, and black screen, which is not displayed.
Please do not use a stair climber when there is only 30% before charging
to full.
* Lithium-ion battery is a consumable product.
* When it displays low power 30% or under voltage DC45V, charging is
required.
Battery Switch:
Deployment:
1.
Upstairs and Downstairs and Fast/Slow Mode Function Measurement:
Switch
Turn on the power box switch and adjust the upstairs and downstairs
switches and speed control separately. Press the operation switch with
your finger, and if the equipment is running normally, the test is
completed. Turn off the power switch.
White dot button
USE THE STAIR CLIMBER
- 7 -
There is an OFF/ON label at the
battery switch, when the power is
turned to the ON side, the power
display lights up and displays the
content; at this time, the power
has an output. Otherwise, it is
turned off.
NOTE: Switch to the ON position
when charging!
Wiring holes
underneath
Publicité
