use, it is necessary to check whether all fasteners on one side are loose
every 3 months.
b. If there are loose fasteners, please replace and tighten them in time to
ensure job security.
INSTRUCTIONS
During the use of the product, please follow the following points:
1. Place the goods on the loading plate, secure them with straps, and
adjust the handrails to fit properly. After reaching the height, lock it tightly.
2. When going upstairs, set the working mode to the upstairs gear and
turn on the power switch, pull the electric load climbing machine to the step,
and place the outer edge of the inflatable wheel on the vertical surface of
the step, tilt the climbing machine to a suitable angle, press down on the
handle, and press the operation switch, when the machine starts to run,
please hold the handle firmly for handling after two steps, pull the climbing
machine backward to make the inflatable wheel stick to the second step
vertical plane, followed by each step up, until transported to the target Floor,
release the running switch and turn off the power to avoid accidental
contact.
3. When going downstairs, set the working mode to the downstairs gear,
turn on the power switch, and push the car to the edge of the step, press
the running switch, and rely on the climbing foot support wheel to stabilize
the climbing car, take the car to the next step, pull it backward and always
keep the wheels perpendicular to the step face to face contact (if the step
depth is large, push the car forward to ensure that the center of the wheel
is in contact with the step, the vertical plane is about 10 centimeters), and
so on until the target floor is reached.
USAGE TIPS
1. Flat promotion:
- 10 -