Publicité
INSTALLATION AND REMOVAL
When you need to remove the power supply:
1. Unplug the power supply.
2. Rotate the two power locking handles counterclockwise to the maximum.
3. Hold the power handle and remove the power supply upwards.
When you need to install a power supply:
1. Rotate the power-fixing handle counterclockwise to the maximum.
2. Put the power supply into the fixing.
3. Rotate the power-fixing handle clockwise to lock the battery.
4. Plug in the power plug.
Remaining Capacity Inspection:
Turn on the power switch, and the power level display lights up. There is a
- 6 -
Publicité
