Publicité
Fill Clean Water Tank and Cleaning Solution
6
(sold separately)
Fill the Clean Water Tank with water� If desired, add the appropriate amount of
Cleaning Solution using the bottle cap� Secure the tank's cover, gently shake to mix,
and then use�
Note:
• Use a clean, dry cloth to wipe off the water on the surface of the tank before putting it in place�
• Please lock the top covers of the Water Tanks tightly before use�
• The water drops in the Water Tank are left over from the function test, please rest assured to use�
• For optimal cleaning results,it is recommended to use only ECOVACS Cleaning Solution� It is
sold separately and can be purchased at
Clean Water Tank
Dirty Water Tank
https://www�ecovacs�com�
Start Cleaning
7
1. Start Mapping
Start mapping via ECOVACS HOME App�
When creating a map for the first time, please follow the robot to help eliminate some minor issues�
For example, the robot may get stuck under the furniture� Please refer to the following solutions:
1� Raise the low sitting furniture if possible;
2�Cover the bottom of the furniture;
3�Set up Virtual Boundary via the App�
When mapping, the robot will explore the house environment automatically� The exploration
path may be different from cleaning path�
2. Start Cleaning
• The robot's Water Tank is automatically refilled through the OMNI Station�
Manual refilling is not needed�
• When mopping, the robot will recognize floor types and is able to lift mops
automatically when encountering carpets� Please do not use the robot on
shaggy rugs or carpets with fibres longer than 10 mm� It is recommended to fold
up the shaggy rugs with fibres longer than 10 mm during the cleaning process,
or go to Map > Carpet Cleaning Stategy in the ECOVACS HOME App to set the
shaggy carpeted area as a No-Entry Zone�
Before cleaning for the first time, please make sure the robot is in the OMNI Station
and fully charged� Tap
button on the robot to start cleaning� You can also use the
ECOVACS HOME App to start cleaning�
3. Pause
Tap
on the robot to pause while it is working� You can also use the ECOVACS
HOME App to pause the robot�
4. Wake up
After pausing for a while, all indicator lights on the robot will go out� To wake up the robot,
short press
�
Short press
15 EN
Publicité
