Recirculation Filter Replacement Indicator 1861 / 1881 & 1861-G1 / 1881-G1 (In Recirculation Mode) - Novy Easy 65 Mode D'emploi

EN
7.2 Recirculation filter replacement indicator
1861 / 1881 &
1861-g1 / 1881-g1 (in recirculation
mode)
The usage time of the recirculation filter depends on
the type of recirculation filter used. After the usage
time has expired, it is recommended to replace the
recirculation filter. The message that replacement is
necessary is indicated by the appliance itself. After
the usage time has expired, [ChA 00h] appears on
the timer display.
Recirculation filter remaining time
Press the zone selection button of the
extractor.
Press 2x
button of the extractor.
The remaining time is indicated.
Resetting the recirculation filter
indicator
Press the zone selection button of the
extractor.
Press 2x
button of the extractor.
Press 00h for 3 seconds until the timer
is reset.
Then press again for 3 seconds to confirm
the reset timmer value.

Follow the replacement instructions set out
in the chapter 9 Cleaning and maintenance.
Your correct type number can be found on the model (marking)
1
plate, which is located on the bottom of your appliance, or
possibly on your invoice.
1
Recirculation filter
above the zone selection
above the zone selection
– 149 –
Display
ChA
00h
150h
300h
450h